RIB LOC® Exposed Fastener Panels
The most recognizable rib structure on the market today. A through-the-sheet fastened panel featuring both strength and easy installation.
RIB LOC Profile
Product Features
- RIB LOC panels have single 3/4” high rib on nine (9) inch centers with intermediate stiffening ribs.
- For use in commercial/industrial, residential and agricultural applications as roofing, mansards, fascia, siding and equipment screens.
- Custom cut to the inch in lengths from three (3) to forty (40) feet.
- For panels over forty (40) feet in length, please call.
- Available in 29 gauge ASTM 792-* 1994 GRADE 80 G-90 galvanized, 26 gauge ASTM 792-* 1994 GRADE 80 acrylume, 24 gauge ASTMA 792-99 GRADE 50 AZ55 acrylume.
- A full line of standard or custom trim items are available in matching or contrasting colors.
Colors
RIB LOC® in 29 ga and 26 ga is painted with Siliconized-Polyester paint system.
 Seafoam White Cool Color |
 Sunrise Red Cool Color |
 Scarlett Red Premium Color |
 Teak Brown |
 Sand Dune Cool Color |
 Gulfstream Blue Premium Color |
 Marsh Gray Cool Color |
 Deep Green |
 Sun Tan Cool Color |
 Black Beard |
 G-90 Galvanized 29ga. ONLY |
 26 Gauge Acrylic Coated Galvalume |
 Copper Penny Premium Color 29ga. ONLY |
RIB LOC in 24 gauge is painted with a Kynar 500® and Hylar 5000® paint system.
Classic Copper Premium Color |
Coastal White |
 Ruby Red Premium Color Cool Color |
 Colonial Red |
 Dark Bronze |
 Medium Bronze |
 Sand Stone Cool Color |
 Sahara Tan Cool Color |
 Beaufort Blue Premium Color |
 Biscayne Blue Premium Color |
 Stone Gray |
 Hilton Head Green |
 Patina |
 Silver Metallic Premium Color |
Onyx Black |
Acrylic Coated Galvalume |
Colors are represented as closely as possible.
If color match is critical, please request a physical sample.
Installation
RIB-LOC® installation manual
- RIB LOC® panels can be installed over open purlins spaced up to 24 inches on center or on solid decking.
- When solid decking is used, a water shedding membrane must be installed. This should be a minimum of 30 pound felt.
- If end laps are required, add 6 inches to panel length. Recommended minimum slope is 2 1/2" in 12 inches.
- Consult your Architect or Engineer for local building codes and/or restrictions.
- RIB LOC® panels can be nailed or screwed to your structure. If nails are used they should be placed on the top of the rib. If screws are used they shoud be installed adjacent to the rib in the flat pans of the panel.