NCR Panels
A low profile loc panel for residential or commercial applications. No clips are required to install this versatile panel.

NCR Panel Profile


Product Features
- NCR panels are a 1" high standing seam snap loc panel.
- Custom cut to the inch in lengths from four (4) to forty (40) feet.
- For panels over forty (40) feet in length, please call.
- Available in 26 gauge steel, with 16 inch coverage.
- All panels can be produced with or without striations. Striations help to reduce the effects of oil canning.
- A full line of standard or custom trim items are available in matching or contrasting colors.
Colors
The NCR panel is available in all of our 26 gauge siliconized polyester paint system.
Seafoam White Cool Color |
Sunrise Red Cool Color |
Scarlett Red Premium Color |
Teak Brown |
Sand Dune Cool Color |
Gulfstream Blue Premium Color |
Marsh Gray Cool Color |
Deep Green |
Sun Tan Cool Color |
Black Beard |
Colors are represented as closely as possible.
If color match is critical, please request a physical sample..
Installation
NCR panel installation manual
Architectural trim installation manual
- NCR panels must be installed over solid decking only. When solid decking is used, a water shedding membrane must be used. This membrane should be a minimum of 30 pound felt.
- Recommended minimum slope is 2 1/2" in 12 inches.
- NCR panels do not require the use of clips to fasten to the deck. Slots in the panel allow for the use of pan head screws for attachment .
- Consult your Architect or Engineer for local building codes and/or restrictions.
- Oil canning is not considered a cause for rejecting the panels.
