5V Exposed Fastener Panels
This is a timeless classic, showing no sign of diminishing popularity or demand. Basic through-the-sheet fastened panel in G-90 galvanized steel, acrylume, and painted.
5V Profile
Product Features
- 5V has 7/16" high ribs on 12 inch centers.
- For use in commercial/industrial, residential and agricultural applications as roofing, mansards, fascia, siding and equipment screens.
- Custom cut to the inch in lengths from three (3) to twenty-one (21) feet.
- For panels over twenty-one (21) feet in length, please call.
- Available in 29 gauge ASTM 792-* 1994 GRADE 80 G-90 galvanized, 26 gauge ASTM 792-* 1994 GRADE 80 acrylume, 24 gauge ASTMA 792-99 GRADE 50 AZ55 acrylume.
- A full line of standard or custom trim items are available in matching or contrasting colors.
Colors
5V in 29 ga and 26 ga is painted with Siliconized-Polyester paint system.
 Seafoam White Cool Color |
 Sunrise Red Cool Color |
 Scarlett Red Premium Color |
 Teak Brown |
 Sand Dune Cool Color |
 Gulfstream Blue Premium Color |
 Marsh Gray Cool Color |
 Deep Green |
 Sun Tan Cool Color |
 Black Beard |
 G-90 Galvanized 29ga. ONLY |
 26 Gauge Acrylic Coated Galvalume |
 Copper Penny Premium Color 29ga. ONLY |
5V in 24 gauge is painted with a Kynar 500® and Hylar 5000® paint system.
Classic Copper Premium Color |
Coastal White |
 Ruby Red Premium Color Cool Color |
 Colonial Red |
 Dark Bronze |
 Medium Bronze |
 Sand Stone Cool Color |
 Sahara Tan Cool Color |
 Beaufort Blue Premium Color |
 Biscayne Blue Premium Color |
 Stone Gray |
 Hilton Head Green |
 Patina |
 Silver Metallic Premium Color |
Onyx Black |
Acrylic Coated Galvalume |
Colors are represented as closely as possible.
If color match is critical, please request a physical sample.
Installation
5V Panel installation manual
- 5V panels can be installed over open purlins spaced up to 24 inches on center or on solid decking.
- When solid decking is used, a water shedding membrane must be installed. This membrane should be a minimum of 30 pound felt.
- If end laps are required, add 6 inches to panel length.
- Recommended minimum slope is 2 1/2" in 12 inches.
- Consult your Architect or Engineer for local building codes and/or restrictions.
- 5V panels can be nailed or screwed to your structure. If nails are used they should be placed on the top of the rib. If screws are used they shoud be installed adjacent to the rib in the flat pans of the panel.