LT-100®
PANELS
HT-150®
PANELS
LT-100®
1" high standing seam concealed fastener panel for
commercial/industrial, residential applications that provides coverage over
solid decking in 12", 16" and 18" widths.
HT-150®
1 ½" high standing seam concealed fastener panel for
commercial/industrial, residential applications that provides coverage over
solid decking in 11", 15" and 17" widths.
Product Features
- LT-100®
features a 1 inch high batten.
- HT-150®
features a 1 1/2 inch high batten.
- Both
products are representative of the standing seam panels seen consistently
on metal roofing over the years.
- Both
are precision leveled in line with state-of-the-art Herr/Voss equipment to
significantly reduce the effects of oil canning.
- All
panels can be manufactured with or without striations. Striations are
recommended.
- Both
products are available in 24-gauge G-90 galvanized steel painted with the
unique COLOR LOC® Kynar 500®/Hylar
5000®
painting system.
- Factory-applied
sealants.
- Colors:
Coastal White, Dark Bronze, Medium Bronze, Beaufort Blue, Hilton Head
Green, Patina, Ruby Red, Sahara Tan, Sand Stone, Stone Gray. Classic
Copper, Spring Island Green, Onyx Black, Colonial Red and Acrylume.
UL 90 Rating
LT-100 and HT-150 panels have been awarded the Underwriter's
Laboratory UL 90 wind uplift classification.
Class 90 as shown by construction Nos. 280. 310, 281, 308.
Air & Water Infiltration
Both panels meet the full performance requirements of the
ASTM E 283 air infiltration test and the
ASTM E 331 water penetration test when applied over a solid
substrate.
Installation
LT-100® and HT-150® panels must be
installed over solid decking.
When solid decking is used it is recommended that a water
shedding membrane be installed .
Minimum slope must be at 2 1/2" in 12". Consult
your architect or engineer for requirements of local codes and conditions.
Production Notes
- For
panels over forty (40) feet in length, please call Coastal Metal Service.
- Oil
canning is not considered a cause for rejecting panels.
