DRI LOC®
Beautiful, durable through-the-sheet fastened panel with a
profile that produces exciting shadow lines on your building.
Product Features
- Two
(2) 7/16" high ribs on nine (9) inch centers with intermediate
stiffening ribs.
- For
use in commercial/industrial, residential and agricultural applications as
roofing, mansards, fascia, siding and equipment screens.
- Custom
cut to the inch in lengths from three (3) to forty (40) feet.
- For
panels over forty (40) feet in length, please call Coastal Metal Service.
- Available
in 29-gauge ASTM A653-*1994 GRADE 80 G-90 galvanized, and diamond embossed
aluminum.
- DRI LOC®
is painted with the Valspar 10S silicon-polyester paint system. Colors:
Seafoam White, Sunrise Red, Scarlett Red, Teak Brown, Sun Tan, Sand Dune,
Gulfstream Blue, Marsh Gray, Deep Green and Black Beard.
- A
full line of standard or custom trim items are available in matching or
contrasting colors.
Installation
DRI LOC® panels can be installed over open purlins spaced
up to 24 inches on center or solid decking.
When solid decking is used it is recommended that a water
shedding membrane be installed.
If end laps are required, add 6 inches to panel length.
Recommended minimum slope is 2 1/2" in 12 inches.
Consult your architect or engineer for requirements of local
codes and conditions.
DRI LOC® panels can be nailed or screwed to your structure.
If nails are used they should be placed on the top of the rib. If screws are
used they should be installed adjacent to the rib in the flat pans of the
panel.
Click here for APPLICATION AND STORAGE INSTRUCTIONS
